The FM6 MAX can directly control the aperture, focus, recording, zoom, etc. of Sony mirrorless cameras, and has two V-mount battery mounts. The stabilizer and the scooter have independent power supplies, and the power base has been upgraded to an integrated unit — simply snap it on and it's ready to use, eliminating the need for B-mount power cables. The FM6 III PRO can only control the zoom and recording of Sony mirrorless cameras, but cannot control the aperture and focus. It only has one V-mount battery mount, and the stabilizer and the scooter share one battery.

Cableway rope installation requires secure anchor points at both ends, such as trusses, Layher frames, or wall studs. The rope must be able to withstand a 100kg pulling force. Detailed cableway installation instructions can be found in the videos provided in the technical support section.

The FM6 III Pro and FM6 MAX have a weight capacity of 6kg, while the FM12 III Pro has a weight capacity of 12kg.

Check if the vehicle's frequency band and the remote control's frequency band are matched. There are four frequency bands that can be switched: 12, 34, 13, and 24.

There are a total of 4, consisting of virtual limits at points A and B + 2 preset points.

Yes, each package comes standard with a foot pedal controller.

The screw positions are different on the DJI RS4 and RS4 Pro. The included reinforcement rod is 8.5cm long, while the RS4 uses a 9cm reinforcement rod. Therefore, users of the DJI RS4 stabilizer need to purchase the RS4 reinforcement rod separately.

The cable car's runtime depends on the capacity of the V-port battery. For example, when using a 14.8V-290Wh V-port camera lithium battery, the runtime can reach 8 hours.

Currently, they are only compatible with DJI stabilizers. The FM6 series supports RS2, RS3PRO, and RS4PRO; the FM12 supports RS2, RS3PRO, RS4PRO, and Ronin 2.

When installing the stabilizer controller module, ensure the knob faces the same direction as the logo on the back of the stabilizer. Do not install it backwards.

Yes, it does. However, since the RS5 stabilizer itself cannot be used for suspended shooting, it cannot be mounted on cable car equipment for use.

Yes, you can zoom using DJI's external focus motor. Please note that you can only control one at a time: zoom or focus.

No, the FM6 III PRO cannot directly control the aperture or focus of a Sony camera.

For specific compatible camera models, please check the DJI Ronin series camera compatibility section on the DJI website.

Use a 2.5mm to 2.5mm camcorder control cable, connect it to the camcorder's REMOTE 2.5mm port, and turn off the FULL AUTO button on the Sony Z280 camcorder.

Check if the Dial Settings on your DJI stabilizer are set to roll. Change it to the aperture function.